Center Certification & Testing International
Project Introduction
The scratch test is one of the commonly used standard methods for testing the bonding strength between the surface film and the base material. Use a material with a hardness greater than the surface film to make a sharp tip to scratch on the surface of the sample or workpiece. Add a load to the scratch head until the film and the substrate are out of contact. At this time, the load is the critical load, and the surface film and the surface film can be calculated. Bonding strength between substrates.
Application range
The scratch test is mainly used to detect and evaluate the anti-shear, scratch, planing, scratch and engraving properties of materials such as anodized materials, rigid organic materials, powder coatings, soft metals, plastics, glass and paint adhesives.
Method Standard
GB/T17657-1999, ISO4586-2, JISK6902, Federal series standard, Terrazzo90322-9E-1, UNI9428Furniture, AS/NZSAS2924.2, ASTMC217, CEN series standard, DIN53799, DIN68861-4
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
Laboratory accreditation is a third-party certification that CNAS has the ability to perform specific testing and calibration work for testing and calibration laboratories.
The scratch test is one of the commonly used standard methods for testing the bonding strength between the surface film and the base material. Use a material with a hardness greater than the surface film to make a sharp tip to scratch on the surface of the sample or workpiece.
Get a quote
Tik Tok
